Building Specifications
GENERAL DESCRIPTION
The shelter shall consist of a molded fiberglass-reinforced-polyester laminated sandwiched foam-cored, composite system. These buildings come with either floors to specifications or tie down flanges. The doors are custom molded to desired sizes and the same basic construction as the enclosure with
reinforcement where needed. All enclosures carry a standard five (5) year structural warranty.
Chlorine injection equip.
Black flush value cover
Equipment enclosure
CONSTRUCTION
The exterior finish shall consist of an ultraviolet-resistant, 15-20 mil thick molded gel coat. The FRP one piece, heavy gauge, premium fiberglass weather-tight bonded skins 1/8" thick will be molded together over a minimum ASTM E 84, Class 11 rating, fire retardant, 2 lbs. per cu. ft. polyurethane foam or better. Some of these systems are modular to conform to the requirements of the specifications. Reinforced cutouts accommodate fans, louvers, hatches and other fixtures. Equipment shall hang from reinforced walls and roof. All connections utilize stainless steel fasteners and hardware.
DESIGN LOADING
- Wind: 75 MPH for Std. Bldg., 135 MPH wind for custom fabrication.
- Ground Snow Load: Pg=30 PSF, 70 PSF w/reinforcement.
- Seismic Zone 1.
- Other options custom quoted.
| LAMINATE PROPERTIES: | VALUE: | TEST METHOD: |
| Tensile Strength | 11,000 psi | ASTM D638 |
| Flexural Strength | 18,000 psi | ASTM D790 |
| Shear Strength | 12,000 psi | ASTM D732 |
| Barcol Hardness | 40 | ASTM D2583 |
| Impact | 12 ft. lbs/inch | ASTM D256 |
| Heat Distortion Point | 175° F | ASTM D384 |
| Density/Specific Gravity | 93.6 PCF / .03 | ASTM D792 |
| Burning Characteristics | <25 Flame Spread <450 Smoke Density |
ASTM E84 |
| CORE PROPERTIES: | VALUE: | TEST METHOD: |
| Thermal Conductivity | .14 BTU. IN. HR, FT2 . F |
ASTM C518 |
| Density/Specific Gravity | 2.0 PCF/.03 | ASTM D1622 |
| Burning Characteristics | <25 Flame Spread <240 Smoke Density |
ASTM E84 |
- Pre-Engineered
- Fully Insulated: R-8 to R-16
- Chemical & UV Resistant
- Portable
FEATURES
Lightweight, Weatherproof, Tough, Shock Resistant, Vermin Proof, Corrosion Resistant, Energy Efficient, and Maintenance Free.
Fiberglass/Polyurethane have a high "R" value for insulation purposes. They are fire retardant. These panels also have a good gain in Radio Frequencies (RF). They are practically transparent to Radio Waves but can be shielded.
|
||||||||
